Amazon Deal Price: $315.00
(as of Apr 18,2021 17:44:54 UTC – Details)
– 6mm arm design for more durability
– XING 2208 motors (6S 1800KV) for more power
– GPS pre-installed for more safety at distance
– 360° TPU protection and Antenna mounts
FPV Stack-SucceX-E F4 Stack (45A 4-in-1 ESC)：
SucceX-E F4 FC
– Input：2-6S（Max 8S）
– BEC：5V/2.5A cont
– Firmware :betaflight_4.0.5_BETAFLIGHTF4.hex
SucceX-E 45A 4in1
– Supports 2-6S Lipo input
– STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
– Current sensor: YES
– BEC: NO
– Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
– Target: G-H-30 BLS 16.7
VTX-SucceX Force 5.8GHz 800mW VTX Adjustable
Camera-Caddx ratel 2.1mm camera
Crossfire nano RX
– Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our iFlight support article on iFlight site “Firmware/Factory Dumps”
– Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
Please check our iFlight support article on iFlight site “How to disable Angle-Mode, activate Acro-Mode”
– GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behaviour.
Please check our iFlight support article on iFlight site “GPS Rescue Mode // Setup”
Pack list (Built and tested)
-1x TITAN XL5 6S FPV Drone – BNF
– 2 sets Nazgul 5140 propellers
– 1x GPS Module
Suggested Parts (not included)
– 6S 1300mAh lipo battery
– Adjustable TPU mount (0-40°) for Gopro
TITAN XL5 6s fpv racing drone BNF with GPS module for GPS rescue (NOT return to home)
NEW X-Geometry frame to get the best performance for freestyle,6mm arms ,more durable,360° TPU protection and antenna mounts
Built with Crossfire Nano RX receiver for TBS ,can bind for TBS controller
SucceX-E F4 45A Stack and our popular XING 2208 1800kv unibell motors
Please read the manual careful before you fly this drone,you can also contact us at any time, we provide best customer service !